datasheet,schematic,electronic components, service manual,repairs,tv,monitor,service menu,pcb design
Schematics 4 Free
Service manuals, schematics, documentation, programs, electronics, hobby ....


registersend pass
Bulgarian - schematics repairs service manuals SearchBrowseUploadWanted

Now downloading free:DENON control protocol Ver. 6.3

DENON control protocol Ver. 6.3 free download

Various electronics service manuals

File information:
File name:control protocol Ver. 6.3.PDF
[preview control protocol Ver. 6.3]
Size:162 kB
Extension:PDF
Mfg:DENON
Model:control protocol Ver. 6.3 🔎
Original:control protocol Ver. 6.3 🔎
Descr: DENON Home Theatre System Home Theatre System Denon - S-302 control protocol Ver. 6.3.PDF
Group:Electronics > Other
Uploaded:19-07-2022
User:Anonymous
Multipart:No multipart

Information about the files in archive:
Decompress result:OK
Extracted files:1
File name control protocol Ver. 6.3.PDF

DENON AVR/AVC control protocol Ver. 6.3 Application model : S-302 Application terminal : RS-232C Connector specification Connector type: DB-9pin female type, slave straight connection (DCE type) ( 1pin : GND , 2pin : TxD , 3pin : RxD , 5pin : Common(GND) , 4,6,7,8,9pin : NC ) Communication format: Synchronous system : Tone step synchronization Communication system : A half duplex Communication speed : 9600bps Character length : 8 bits Parity control : None Start bit : 1 bit Stop bit : 1 bit Communication procedure : Non procedural Communication data length : 135 bytes (maximum) -1- Protocol specification The following three data forms are defined. COMMAND : The message sent to a system(AVR/AVC) from a controller(Touch Panel etc.) A command to a system is given from a controller. EVENT : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) The result is sent, when a system is operated directly and a state changes. *The form of EVENT presupposes that it is the same as that of COMMAND. **Refer to the following table for the contents of COMMAND and EVENT. RESPONSE : The message sent to a controller(Touch Panel etc.) from a system(AVR/AVC) if the `request command' (COMMAND+?+CR(0x0D)) has came from a controller. The RESPONSE should be sent within 200ms of receiving the COMMAND. *The form of RESPONSE presupposes that it is the same as that of EVENT. Basic specification : The command by ASCII CODE, parameter expression *ASCII CODE which can be used is from 0x20 to 0x7F : the alphabet and the number of 0-9 , and space (0x20) , Some signs , AND carriage return(0x0D)--- It is used only as a pause sign. Command structure : COMMAND + PARAMETER + CR(0x0D) COMMAND : ASCII CODE of 2 characters ex. SI : Select Input source MS : surround Mode Setting MV : Master Volume setting PW : system PoWer setting PARAMETER : ASCII CODE ( up to 25 characters) ex. DVD : function name CDR/TAPE : function name THX SURROUND EX : surround mode name SUPER STADIUM : surround mode name *Special Parameter--- ? : for request command

>> View document online <<



>> Download document << eServiceInfo Context Help



Was this file useful ? Share Your thoughts with the other users.

User ratings and reviews for this file:

DateUserRatingComment

Average rating for this file: 0.00 ( from 0 votes)


Similar Service Manuals :
DENON Схема DN-M991R - DENON Инструкция DP-67L & 72L - DENON Service Bulletin DZ10-058 - DENON Service Bulletin OST-632 - DENON Service Bulletin PZ09-164 - DENON Описание DVD-1930 - DENON Схема DVD-800 -
 FB -  Links -  Info / Contacts -  Forum -   Last SM download : SWAN 600r

script execution: 0.08 s